Development of a Thermal Control Architecture for the Mars Exploration Rovers

Details Development of a Thermal Control Architecture for the Mars Exploration Rovers Development of a Thermal Control Architecture for the Mars Exploration Rovers

Jan 2003

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2003aipc..654..194n&link_type=abstract

SPACE TECHNOLOGY AND APPLICATIONS INT.FORUM-STAIF 2003: Conf.on Thermophysics in Microgravity; Commercial/Civil Next Generation

Statistics

Applications

Spaceborne And Space Research Instruments, Apparatus, And Components

Scientific paper

In May and June of 2003, the National Aeronautics and Space Administration (NASA) will launch two roving science vehicles on their way to Mars. They will land on Mars in January and February of 2004 and carry out 90-Sol missions. This paper addresses the thermal design architecture of the Mars Exploration Rover (MER) developed for Mars surface operations. The surface atmosphere temperature on Mars can vary from 0°C in the heat of the day to -100°C in the early morning, prior to sunrise. Heater usage at night must be minimized in order to conserve battery energy. The desire to minimize nighttime heater energy led to a design in which all temperature sensitive electronics and the battery were placed inside a well-insulated (carbon-opacified aerogel lined) Warm Electronics Box (WEB). In addition, radioisotope heater units (RHU's, non-electric heat sources) were mounted on the battery and electronics inside the WEB. During the Martian day, the electronics inside the WEB dissipate a large amount of energy (over 710 W*hrs). This heat energy raises the internal temperatures inside the WEB. Hardware items that have similar temperature limits were conductively coupled together to share heat and concentrate thermal mass. Thermal mass helped to minimize temperature increases in the hot case (with maximum internal dissipation) and minimize temperature decreases in the cold case (with minimum internal dissipation). In order to prevent the battery from exceeding its maximum allowable flight temperature, wax-actuated passive thermal switches were placed between the battery and an external radiator. This paper discusses the design philosophies and system requirements that resulted in a successful Mars rover thermal design.

Affiliated with

Also associated with

No associations

Rating

Development of a Thermal Control Architecture for the Mars Exploration Rovers does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Development of a Thermal Control Architecture for the Mars Exploration Rovers, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Development of a Thermal Control Architecture for the Mars Exploration Rovers will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1525160