Astronomy and Astrophysics – Astronomy
Scientific paper
Aug 2008
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2008spie.7014e.101w&link_type=abstract
Ground-based and Airborne Instrumentation for Astronomy II. Edited by McLean, Ian S.; Casali, Mark M. Proceedings of the SPI
Astronomy and Astrophysics
Astronomy
Scientific paper
The near infrared (NIR) upgrade to the Robert Stobie Spectrograph (RSS) on the Southern African Large Telescope (SALT), RSS/NIR, extends the spectral coverage of all modes of the optical spectrograph. The RSS/NIR is a low to medium resolution spectrograph with broadband, spectropolarimetric, and Fabry-Perot imaging capabilities. The optical and NIR arms can be used simultaneously to extend spectral coverage from 3200 Å to approximately 1.6 μm. Both arms utilize high efficiency volume phase holographic gratings via articulating gratings and cameras. The NIR camera incorporates a HAWAII-2RG detector with an Epps optical design consisting of 6 spherical elements and providing subpixel rms image sizes of 7.5 +/- 1.0 μm over all wavelengths and field angles. The NIR spectrograph is semi-warm, sharing a common slit plane and partial collimator with the optical arm. A pre-dewar, cooled to below ambient temperature, houses the final NIR collimator optic, the grating/Fabry-Perot etalon, the polarizing beam splitter, and the first three camera optics. The last three camera elements, blocking filters, and detector are housed in a cryogenically cooled dewar. The semi-warm design concept has long been proposed as an economical way to extend optical instruments into the NIR, however, success has been very limited. A major portion of our design effort entails a detailed thermal analysis using non-sequential ray tracing to interactively guide the mechanical design and determine a truly realizable long wavelength cutoff over which astronomical observations will be sky-limited. In this paper we describe our thermal analysis, design concepts for the staged cooling scheme, and results to be incorporated into the overall mechanical design and baffling.
Mulligan Mark P.
Rogers Allen
Sheinis Andrew I.
Wolf Marsha J.
Wong Jeffrey P.
No associations
LandOfFree
Designing the optimal semi-warm NIR spectrograph for SALT via detailed thermal analysis does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Designing the optimal semi-warm NIR spectrograph for SALT via detailed thermal analysis, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Designing the optimal semi-warm NIR spectrograph for SALT via detailed thermal analysis will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1059233