Mathematics
Scientific paper
Dec 1991
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1991uta..rept.....c&link_type=abstract
Final Report Texas Univ., Austin.
Mathematics
Composite Structures, Design Analysis, Elastic Properties, Fiber Composites, Finite Element Method, Mars (Planet), Mars Surface, Roving Vehicles, Surface Vehicles, University Program, Wheels, Cryogenic Temperature, Fatigue (Materials), Fracture Strength, High Strength, Kevlar (Trademark), Mathematical Models, Thermoplasticity
Scientific paper
The Jet Propulsion Laboratory has identified the need for a compliant wheel for a miniature martian rover vehicle. This wheel must meet requirements of minimum mass, linear radial deflection, and reliability in cryogenic conditions over a five year lifespan. Additionally, axial and tangential deflections must be no more than 10 percent of the radial value. The team designed a wheel by use of finite element and dimensionless parameter analysis. Due to the complex geometry of the wheel, a finite element model describing its behavior was constructed to investigate different wheel configurations. Axial and tangential deflections were greatly reduced but did not meet design criteria. A composite material was selected for its high strength, toughness, fatigue resistance, and damping characteristics. The team chose a Kevlar fiber filled thermoplastic composite. This report is divided into four primary sections. First, the introduction section gives background information, defines the task, and discusses the scope and limitations of the project. Second, the alternative designs section introduces alternative design solutions, addresses advantages and disadvantages of each, and identifies the parameters used to determine the best design. Third, the design solution section introduces the methods used to evaluate the alternates, and gives a description of the design process used. Finally, the conclusion and recommendations section evaluates the wheel design, and offers recommendations pertaining to improvement of the design solution.
Carroll Mark
Johnson Jess
Yong Jimmy
No associations
LandOfFree
Design of a compliant wheel for a miniature rover to be used on Mars does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Design of a compliant wheel for a miniature rover to be used on Mars, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Design of a compliant wheel for a miniature rover to be used on Mars will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1269499