Design modeling of the 100-J diode-pumped solid state laser for Project Mercury

Details Design modeling of the 100-J diode-pumped solid state laser for Project Mercury Design modeling of the 100-J diode-pumped solid state laser for Project Mercury

May 1998

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1998spie.3265..114o&link_type=abstract

Proc. SPIE Vol. 3265, p. 114-129, Solid State Lasers VII, Richard Scheps; Ed.

Computer Science

Performance

Scientific paper

We present the energy, propagation, and thermal modeling for a diode-pumped solid-state laser called Mercury being designed and built at LLNL using Yb:S-FAP [i.e., Yb3+-doped Sr5(PO4)3F crystals] for the gain medium. This laser is intended to produce 100 J pulses at 1 to 10 ns at 10 Hz with an electrical efficiency of approximately 10%. Our modeling indicates that the laser will be able to meet its performance goals.

Affiliated with

Also associated with

No associations

Rating

Design modeling of the 100-J diode-pumped solid state laser for Project Mercury does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Design modeling of the 100-J diode-pumped solid state laser for Project Mercury, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Design modeling of the 100-J diode-pumped solid state laser for Project Mercury will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1047146