Design, Manufacture and Test of the L-Band Feed for the FAST 30m Demonstrator

Details Design, Manufacture and Test of the L-Band Feed for the FAST 30m Demonstrator Design, Manufacture and Test of the L-Band Feed for the FAST 30m Demonstrator

Mar 2007

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2007pnaoc...4...48g&link_type=abstract

Astronomical Research and Technology. Publications of National Astronomical Observatories of China (ISSN 1672-7673), Vol. 4, No.

Other

Feeds

Scientific paper

In this paper, the design, manufacture and test of the L-band feed for the FAST (Five hundred meter Aperture Spherical Radio Teslescope) 30m demonstrator are presented. The HFSS is used for the simulation during the design. The feed was made by hand using cardboard, plastic board and adhesive aluminum foil tap. The test manufacture shows that this manually made feed meets the required specification of the FAST 30m demonstrator. The design using the HFSS and manufacture by hand might be a fast, economical and effective method for producing simple feed and may be helpful to other similar work.

Affiliated with

Also associated with

No associations

Rating

Design, Manufacture and Test of the L-Band Feed for the FAST 30m Demonstrator does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Design, Manufacture and Test of the L-Band Feed for the FAST 30m Demonstrator, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Design, Manufacture and Test of the L-Band Feed for the FAST 30m Demonstrator will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1840626