Design, fabrication and testing of an SP-100-like phase separator in a microgravity environment

Details Design, fabrication and testing of an SP-100-like phase separator in a microgravity environment Design, fabrication and testing of an SP-100-like phase separator in a microgravity environment

Jan 1998

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1998aipc..420..501b&link_type=abstract

Space technology and applications international forum - 1998. AIP Conference Proceedings, Volume 420, pp. 501-504 (1998).

Statistics

Applications

Spaceborne And Space Research Instruments, Apparatus, And Components, Solubility, Segregation, And Mixing, Phase Separation, Testing In Microgravity Environments

Scientific paper

The project encompassed the conception, construction, and testing of an SP-100 like design for the separation of gas-liquid phases in a microgravity environment. The system was successful in obtaining a stable column of air within a circulating liquid water volume in a fixed cylinder; however, some difficulties were noted. Air bubbles did not readily coalesce with the main vapor column within the short microgravity period established inside the KC-135A. Potential mechanisms to eliminate this problem in subsequent tests are described.

Affiliated with

Also associated with

No associations

Rating

Design, fabrication and testing of an SP-100-like phase separator in a microgravity environment does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Design, fabrication and testing of an SP-100-like phase separator in a microgravity environment, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Design, fabrication and testing of an SP-100-like phase separator in a microgravity environment will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1651656