Statistics – Applications
Scientific paper
Dec 1993
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1993spie.2009..246t&link_type=abstract
Proc. SPIE Vol. 2009, p. 246-252, X-Ray Detector Physics and Applications II, Victor J. Orphan; Ed.
Statistics
Applications
1
Scientific paper
We previously reported on the development, design, and clinical evaluation of a CCD-based, high performance, filmless imaging system for stereotactic needle biopsy procedures in mammography. The MammoVision system has a limited imaging area of 50 mm X 50 mm, since it is designed specifically for breast biopsy applications. We are currently developing a new filmless imaging system designed to cover the 18 cm X 24 cm imaging area required for screening and diagnostic mammography. The diagnostic mammography system is based on four 1100 X 330 pixel format, full-frame, scientific grade, front illuminated, MPP mode CCDs, with 24 micrometers X 24 micrometers square pixels Each CCD is coupled to an x-ray intensifying screen via a 1.7:1 fiber optic reducer. The detector assembly (180 mm long and 13.5 mm wide) is scanned across the patient's breast synchronously with the x-ray source, with the CCDs operated in time-delay integration (TDI) mode. The total scan time is 4.0 seconds.
Piccaro Michele F.
Toker Emre
No associations
LandOfFree
Design and development of a fiber optic TDI CCD-based slot-scan digital mammography system does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Design and development of a fiber optic TDI CCD-based slot-scan digital mammography system, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Design and development of a fiber optic TDI CCD-based slot-scan digital mammography system will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1302754