Data acquisition card for CERN proton synchrotron beam current transformers

Details Data acquisition card for CERN proton synchrotron beam current transformers Data acquisition card for CERN proton synchrotron beam current transformers

Jan 2008

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2008spie.6937e..31k&link_type=abstract

Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments 2007. Edited by Romaniuk, Rys

Statistics

Applications

Scientific paper

A new acquisition system has been developed to allow the measurement of an individual intensity of each bunch in a bunch train. Such a system will be used for the measurement of beams at the injection, ejection and acceleration lines. The method is based on integrating of the analogue signal supplied by a Beam Current Transformer (BCT). The signal is sampled by two 12 bits ADCs. The output of the ADC is then processed in the FPGA, where the rest of the signal processing is performed. In case of the Proton Synchrotron (PS), special synchronization algorithm has been developed. The measurement system was build as a standard VME module. Apart from that, on the same board there were implemented current and charge calibrators.

Affiliated with

Also associated with

No associations

Rating

Data acquisition card for CERN proton synchrotron beam current transformers does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Data acquisition card for CERN proton synchrotron beam current transformers, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Data acquisition card for CERN proton synchrotron beam current transformers will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1258097