Controlling an ALADDIN 1K X 1K array with Wildfire

Details Controlling an ALADDIN 1K X 1K array with Wildfire Controlling an ALADDIN 1K X 1K array with Wildfire

Jun 1995

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1995spie.2475..118h&link_type=abstract

Proc. SPIE Vol. 2475, p. 118-129, Infrared Detectors and Instrumentation for Astronomy, Albert M. Fowler; Ed.

Astronomy and Astrophysics

Astronomy

Scientific paper

Wildfire is the array and instrument controller currently used in the infra-red instrumentation at National Optical Astronomy Observatories. Wildfire is a high performance, versatile transputer based controller which handles the clocking and readout of two-dimensional arrays along with all other aspects of instrument control. The system was originally designed to support the present generation of 256 X 256 infra-red arrays. This paper discusses the upgrade plan for Wildfire which is required to read out the newly developed 1 K X 1 K InSb arrays.

Affiliated with

Also associated with

No associations

Rating

Controlling an ALADDIN 1K X 1K array with Wildfire does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Controlling an ALADDIN 1K X 1K array with Wildfire, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Controlling an ALADDIN 1K X 1K array with Wildfire will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-760879