Computer Science
Scientific paper
May 2009
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2009spie.7281e...6m&link_type=abstract
4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes. Edited by
Computer Science
Scientific paper
In terms of large-scale optical telescope, the design of multi-motor friction drive is obviously advantageous than that of single motor direct drive on the expense for manufacture of motors. However, to keep the high accuracy of tracking of multi-motor friction drive in certain velocity and acceleration, synchronized control for multi-motor and compensation to the mechanical resonance are needed. After designing appropriate multi-motor drive and synchronized compensation device, we overcame the interference among running motors, restricted the velocity difference in smooth running to a smaller range, and set a good foundation for the design of correcting parameter. Besides, to expand the closed loop bandwidth of the system, the control loop model has been identified, and the compensator based on the identified model effectively improved the influence of the mechanical resonance. The experimental results showed that for multi-motor friction drive of the 1.2-m large-scale Alt-Azimuth optical telescope, the proposed approach obtained high accuracy when running at the max velocity of 3 deg/s.
Bao Qi-Liang
Ma Jia-Guang
Mao Yao
Yang Song-Hua
No associations
LandOfFree
Control system for multi-motor friction drive of a large-scale optical telescope does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Control system for multi-motor friction drive of a large-scale optical telescope, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Control system for multi-motor friction drive of a large-scale optical telescope will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1113466