Comments on the optimization of high resolution Fabry-Pérot filtergraphs

Astronomy and Astrophysics – Astrophysics

Scientific paper

Rate now

  [ 0.00 ] – not rated yet Voters 0   Comments 0

Details

29

Telescopes, Instrumentation: Interferometers, Instrumentation: Polarimeters, Techniques: High Angular Resolution, Techniques: Spectroscopic

Scientific paper

In this paper we present results of simulations of Fabry-Pérot (FPI) system performance that address two entirely separate aspects. The first concerns the image quality of FPIs used in telecentric optical setups. We show that the image degradation from phase errors found by von der Lühe & Kentischer (2000, A&AS, 146, 499) can largely be compensated by refocusing and that the major cause of image degradation is the pupil apodization discussed by Beckers (1998, A&AS, 120, 191). We also discuss the optimization of FPI systems, considering the effects of cavity errors on the homogeneity of the instrument function (transmission profile) across the FOV when two FPIs are combined in a telecentric reimaging system. Our conclusions from several numerical experiments are that telecentric FPI systems that use two or more FPIs with high (94-95%) reflectivities are likely to show large variations in the instrument profile across the FOV unless the cavity errors are significantly smaller than 2.0 nm. We show, that such homogeneity can be obtained at relatively low "cost" in terms of increased parasitic light levels by lowering the reflectivity of the FPI with the smallest cavity separation rather then lowering the reflectivity of both FPIs. We also demonstrate that the choice of cavity ratios has a strong impact on the homogeneity of the spectral transmission profile across the FOV and that double FPI systems with cavity ratios around 0.3 perform much better than at around 0.6.

No associations

LandOfFree

Say what you really think

Search LandOfFree.com for scientists and scientific papers. Rate them and share your experience with other people.

Rating

Comments on the optimization of high resolution Fabry-Pérot filtergraphs does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Comments on the optimization of high resolution Fabry-Pérot filtergraphs, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Comments on the optimization of high resolution Fabry-Pérot filtergraphs will most certainly appreciate the feedback.

Rate now

     

Profile ID: LFWR-SCP-O-1579016

  Search
All data on this website is collected from public sources. Our data reflects the most accurate information available at the time of publication.