Cellular and dendritic solidification of Al-Li alloys during the D2-mission

Details Cellular and dendritic solidification of Al-Li alloys during the D2-mission Cellular and dendritic solidification of Al-Li alloys during the D2-mission

Aug 1995

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1995adspr..16..173d&link_type=abstract

Advances in Space Research, Volume 16, Issue 7, p. 173-176.

Other

1

Scientific paper

Cellular solidification is one of the major techniques to produce engineering components, since a close control of the microstructure and thus the properties of the material is allowed. During the D2-mission, directional solidification of Al-Li alloys was carried out to study the influence of convection in the liquid phase on the deep cell-dendrite transition and to establish the precise correlation between the interfacial microstructure and the processing parameters. Six samples have been solidified corresponding to different destabilization levels: three alloys in the GFQ and three other in the GHF. By using statistical tools /1/, the primary spacing of the microstructure is calculated. Macrosegregation is determined by chemical analysis.

Affiliated with

Also associated with

No associations

Rating

Cellular and dendritic solidification of Al-Li alloys during the D2-mission does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Cellular and dendritic solidification of Al-Li alloys during the D2-mission, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Cellular and dendritic solidification of Al-Li alloys during the D2-mission will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1267112