An autoguider system for the 40 CM Schmidt telescope

Details An autoguider system for the 40 CM Schmidt telescope An autoguider system for the 40 CM Schmidt telescope

Mar 1983

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1983mmkyo..36..291o&link_type=abstract

In Kyoto Univ. Mem. of the Fac. of Sci., Kyoto Univ., Ser. of Phys., Astrophys., Geophys. and Chem., Vol. 36, No. 2 p 291-303

Other

Automatic Control, Guidance Sensors, Schmidt Telescopes, Data Processing, Errors, Image Dissector Tubes, Microprocessors

Scientific paper

An autoguider system was constructed for the 40 cm Schmidt telescope at the Ouda Station. The sensor of the guider, a type ITT FW 130 image dissector, is attached to the guiding telescope. A microprocessor is introduced for processing the sensor output and for correcting the guiding error of the telescope. This enables the broadening of the objective prism spectra by a simple software. The microprocessor is used also for other auxiliary functions for the telescope control.

Affiliated with

Also associated with

No associations

Rating

An autoguider system for the 40 CM Schmidt telescope does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with An autoguider system for the 40 CM Schmidt telescope, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and An autoguider system for the 40 CM Schmidt telescope will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1469765