A Saturn Ring Observer Mission Using Multi-Mission Radioisotope Power Systems

Details A Saturn Ring Observer Mission Using Multi-Mission Radioisotope Power Systems A Saturn Ring Observer Mission Using Multi-Mission Radioisotope Power Systems

Jan 2006

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2006aipc..813..155a&link_type=abstract

SPACE TECH.& APPLIC.INT.FORUM-STAIF 2006: 10th Conf Thermophys Applic Microgravity; 23rd Symp Space Nucl Pwr & Propulsion; 4th C

Other

Power And Production Reactors, Thermoelectric, Electrogasdynamic And Other Direct Energy Conversion, Spaceborne And Space Research Instruments, Apparatus, And Components, Planetary Rings

Scientific paper

Saturn remains one of the most fascinating planets within the solar system. To better understand the complex ring structure of this planet, a conceptual Saturn Ring Observer (SRO) mission is presented that would spend one year in close proximity to Saturn's A and B rings, and perform detailed observations and measurements of the ring particles and electric and magnetic fields. The primary objective of the mission would be to understand ring dynamics, including the microphysics of individual particles and small scale (meters to a few kilometers) phenomena such as particle agglomeration behavior. This would be accomplished by multispectral imaging of the rings at multiple key locations within the A and B rings, and by ring-particle imaging at an unprecedented resolution of 0.5 cm/pixel. The SRO spacecraft would use a Venus-Earth-Earth-Jupiter Gravity Assist (VEEJGA) and be aerocaptured into Saturn orbit using an advanced aeroshell design to minimize propellant mass. Once in orbit, the SRO would stand off from the ring plane 1 to 1.4 km using chemical thrusters to provide short propulsive maneuvers four times per revolution, effectively causing the SRO vehicle to ``hop'' above the ring plane. The conceptual SRO spacecraft would be enabled by the use of a new generation of multi-mission Radioisotope Power Systems (RPSs) currently being developed by NASA and DOE. These RPSs include the Multi-Mission Radioisotope Thermoelectric Generator (MMRTG) and Stirling Radioisotope Generator (SRG). The RPSs would generate all necessary electrical power (>=330 We at beginning of life) during the 10-year cruise and 1-year science mission (~11 years total). The RPS heat would be used to maintain the vehicle's operating and survival temperatures, minimizing the need for electrical heaters. Such a mission could potentially launch in the 2015-2020 timeframe, with operations at Saturn commencing in approximately 2030.

Affiliated with

Also associated with

No associations

Rating

A Saturn Ring Observer Mission Using Multi-Mission Radioisotope Power Systems does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with A Saturn Ring Observer Mission Using Multi-Mission Radioisotope Power Systems, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and A Saturn Ring Observer Mission Using Multi-Mission Radioisotope Power Systems will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1283088