Astronomy and Astrophysics – Astronomy
Scientific paper
Aug 2008
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2008spie.7014e.131z&link_type=abstract
Ground-based and Airborne Instrumentation for Astronomy II. Edited by McLean, Ian S.; Casali, Mark M. Proceedings of the SPI
Astronomy and Astrophysics
Astronomy
Scientific paper
There were a few methods taken in the profile tolerance measurement of the LAMOST Focal Plane Plate. One of the methods was to use CMM (Coordinate Measurement Machine) to measure the points on the small Focal Plane Plate and calculate the points whether or not in the tolerance zone. In this process there are some small shortcomings. The measuring point positions on the Focal Plane Plate are not the actual installation location of the optical fiber positioning system. In order to eliminate these principle errors, a measuring mandrel is inserted into the unit-holes, and the precision for the mandrel with the hole is controlled in the high level. Then measure the center of the precise target ball which is placed on the measuring mandrel by CMM. At last, fit a sphere surface with the measuring center points of the target ball and analyze the profile tolerance of the Focal Plane Plate. This process will be more in line with the actual installation location of the optical fiber positioning system. When use this method to judge the profile tolerance can provide the reference date for maintaining the ultra error unit-holes on the Focal Plane Plate. But when insert the measuring mandrel into the unit hole, there are manufacturing errors in the measuring mandrel, target ball and assembly errors. All these errors will bring the influence in the measurement. In the paper, an impact evaluation assesses the intermediate process with all these errors through experiments. And the experiment results show that there are little influence when use the target ball and the measuring mandrel in the measurement of the profile tolerance. Instead, there are more advantages than many past use of measuring methods.
Jin Yi
Xing Xiaozheng
Zhai Chao
Zhou Zengxiang
No associations
LandOfFree
A new measurement method of profile tolerance for the LAMOST focal plane does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with A new measurement method of profile tolerance for the LAMOST focal plane, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and A new measurement method of profile tolerance for the LAMOST focal plane will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1059687