3.6 m Telescope Headed for Testing and Erection

Details 3.6 m Telescope Headed for Testing and Erection 3.6 m Telescope Headed for Testing and Erection

May 1974

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1974msngr...1....4r&link_type=abstract

The Messenger, vol. 1, p. 4-4

Computer Science

Scientific paper

The big telescope moves on towards its big day in 1976. In the Creusot-Loire plant at Saint-Chamond, near Grenoble, where a large part of the work has been done, all the major components have now been welded and stress released. Machining and the manufacture of all the smaller parts will be completed by the summer of 1974. Then, after testing of some 20 sub-assemblies, the assembly of the whole telescope will begin and it will be completed by January, 1975. A six-month period is allotted for the telescope tests and adjustment of the drives. The alignment procedures will also be determined during this time.

Affiliated with

Also associated with

No associations

Rating

3.6 m Telescope Headed for Testing and Erection does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with 3.6 m Telescope Headed for Testing and Erection, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and 3.6 m Telescope Headed for Testing and Erection will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1597088