Energy conversion in laser propulsion III

Details Energy conversion in laser propulsion III Energy conversion in laser propulsion III

May 2003

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2003aipc..664..170l&link_type=abstract

BEAMED ENERGY PROPULSION: First International Symposium on Beamed Energy Propulsion. AIP Conference Proceedings, Volume 664, pp

Statistics

Applications

Spaceborne And Space Research Instruments, Apparatus, And Components, Laser Applications, Ion And Plasma Propulsion

Scientific paper

Conversion of pulses of CO2 laser energy (18 microsecond pulses) to propellant kinetic energy was studied in a Myrabo Laser Lightcraft (MLL) operating with laser heated STP air and laser ablated delrin propellants. The MLL incorporates an inverted parabolic reflector that focuses laser energy into a toroidal volume where it is absorbed by a unit of propellant mass that subsequently expands in the geometry of the plug nozzle aerospike. With Delrin propellant, measurements of the coupling coefficients and the ablated mass as a function of laser pulse energy showed that the efficiency of conversion of laser energy to propellant kinetic energy was ~ 54%. With STP air, direct experimental measurement of efficiency was not possible because the propellant mass associated with measured coupling coefficients was not known. Thermodynamics predicted that the upper limit of the efficiency of conversion of the internal energy of laser heated air to jet kinetic energy, α, is ~ 0.30 for EQUILIBRIUM expansion to 1 bar pressure. For FROZEN expansion α ~ 0.27. These upper limit efficiencies are nearly independent of the initial specific energy from 1 to 110 MJ/kg. With heating of air at its Mach 5 stagnation density (5.9 kg/m3 as compared to STP air density of 1.18 kg/m3) these efficiencies increase to about 0.55 (equilibrium) and 0.45 (frozen). Optimum blowdown from 1.18 kg/m3 to 1 bar occurs with expansion ratios ~ 1.5 to 4 as internal energy increases from 1 to 100 MJ/kg. Optimum expansion from the higher density state requires larger expansion ratios, 8 to 32. Expansion of laser ablated Delrin propellant appears to convert the absorbed laser energy more efficiently to jet kinetic energy because the effective density of the ablated gaseous Delrin is significantly greater than that of STP air.

Affiliated with

Also associated with

No associations

Rating

Energy conversion in laser propulsion III does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Energy conversion in laser propulsion III, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Energy conversion in laser propulsion III will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1370489