Other
Scientific paper
Nov 2001
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2001dps....33.5702b&link_type=abstract
American Astronomical Society, DPS Meeting #33, #57.02; Bulletin of the American Astronomical Society, Vol. 33, p.1143
Other
1
Scientific paper
In the past year I have converted the Lowell Observatory 0.8-m telescope from a classically scheduled and operated telescope to an automated facility. The new setup uses an existing CCD camera and the existing telescope control system. The key steps in the conversion were writing a new CCD control and data acquisition module plus writing communication and queue control software. The previous CCD control program was written for DOS and much of the code was reused for this project. The entire control system runs under Linux and consists of four daemons: MOVE, PCCD, CMDR, and PCTL. The MOVE daemon is a process that communciates with the telescope control system via an RS232 port, keeping track of its state and forwarding commands from other processes to the telescope. The PCCD daemon controls the CCD camera and collects data. The CMDR daemon maintains a FIFO queue of commands to be executed during the night. The PCTL daemon receives notification from any other deamon of execution failures and sends an error code to the on-duty observer via a numeric pager. This system runs through the night much as you would traditionally operate a telescope. However, this system permits queuing up all the commands for a night and they execute one after another in sequence. Additional commands are needed to replace the normal human interaction during observing (ie., target acquisition, field registration, focusing). Also, numerous temporal synchronization commands are required so that observations happen at the right time. The system was used for this year's photometric monitoring of Pluto and Triton and is in general use for 2/3 of time on the telescope. Pluto observations were collected on 30 nights out of a potential pool of 90 nights. Detailed system design and capabilites plus sample observations will be presented. Also, a live demonstration will be provided if the weather is good. This work was supported by NASA Grant NAG5-4210 and the NSF REU Program grant to NAU.
No associations
LandOfFree
Automation of the Lowell Observatory 0.8-m Telescope does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Automation of the Lowell Observatory 0.8-m Telescope, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Automation of the Lowell Observatory 0.8-m Telescope will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1239113